User manual

4-5
Cisco Active Network Abstraction 3.6.6 MPLS User Guide
OL-19192-01
Chapter 4 Viewing MPLS VPN Properties
Viewing VRF Properties in the Inventory Window
Note You can also open a VRF table by right-clicking the virtual router in the Cisco ANA NetworkVision tree
or map pane and selecting Open VRF Table. For more information about the columns displayed in the
VRF Table window, see Viewing Virtual Router Properties, page 4-2.
Displaying VRF Egress and Ingress Adjacents
Cisco ANA enables you to view the exporting and importing neighbors by displaying the VRF egress
and ingress adjacents. In addition, you can view the connectivity between the VRFs for the route targets
and view their properties. For example, if VRF A retrieved route target import X, you can view all VRFs
that export X as a route target whether it is in the same or another VPN.
To display the VRF egress and ingress adjacents:
Step 1 Right-click the virtual router in the Cisco ANA NetworkVision tree and choose Show VRF Egress
Adjacents/Show VRF Ingress Adjacents. The Adjacents window is displayed.
Step 2 In the Adjacents dialog box, view the ingress and egress adjacent properties:
• Name—The name of the VRF as it appears in the device.
• Route Distinguisher—The route distinguisher configured in the VRF.
Note Selecting a specific VRF in the Cisco ANA NetworkVision tree pane displays the VRF
properties. For more information, see Viewing Virtual Router Properties, page 4-2.
Step 3 When finished, press Ctrl + F4 to close the Adjacents window.
Viewing VRF Properties in the Inventory Window
You can view VRFs that are provisioned in individual devices by displaying the device inventory view
and navigating to the VRF logical inventory, as shown in Figure 4-2.