User Manual

ManualsBrandsCisco Systems ManualsElectronicsCisco 802.11 abg Radio

Table Of Contents

3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers

11/17/06 BETA DRAFT —CISCO CONFIDENTIAL

Cisco IOS Release TBD

3G Wireless High-Speed WAN Interface Card for

Cisco 1800, 2800, and 3800 Series Routers

The Third Generation (3G) Wireless High-Speed WAN interface card (HWIC) is a multiband,

multiservice WAN card. Its primary application is WAN connectivity as a backup datalink for critical

data applications. It is an alternative to ISDN as a backup line because it offers 3G wireless sustainable

data rates of 150 to 500 kbps. However, the cellular HWIC can also function as the primary WAN

connection. It supports the following Cisco integrated services routers (Cisco ISRs):

• Cisco 1841

• Cisco 2800

• Cisco 3800

The cellular WAN HWIC has the following features:

• Broadband WAN connectivity using high speed cellular data technology

• Cellular interface based on the async interface in Cisco IOS

• Multiple product SKUs for CDMA and GSM standards

• Multiple external antenna options

• Supports different speeds with different networks.

• Static and dynamic IP addressing

• Modem-based support for mobile IP

• Automatic best network selection

• Supports CDMA Over the Air Service Provisioning (OTASP)

• NAT support

• Security features like Firewall, IDS/IPS and IPSec VPN on the router

• WAN switchover using IOS backup interface feature

Summary of content (64 pages)

PAGE 1
1 / 1 7 / 0 6 B E TA D R A F T — C I S C O C O N F I D E N T I A L 3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers The Third Generation (3G) Wireless High-Speed WAN interface card (HWIC) is a multiband, multiservice WAN card. Its primary application is WAN connectivity as a backup datalink for critical data applications. It is an alternative to ISDN as a backup line because it offers 3G wireless sustainable data rates of 150 to 500 kbps.
PAGE 2
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers B E TA D R A F T — C I S C O C O N F I D E N T I A L Figure 1 shows the GSM (HSDPA/UMTS) WAN HWIC: Figure 1 Front Panel of the HSDPA WAN HWIC HWIC3G-GSM WWAN RSSI Diag Port UMTS HSDPA 170842 ANT Figure 2 shows the front panel of the CDMA (EVDO) WAN HWIC: Front Panel of the EVDO WAN HWIC DIV HWIC3G-CDMA WWAN RSSI MAIN Diag Port 1xRTT EVDO 170843 Figure 2 The cellular WAN HWIC will provide the following s
PAGE 3
G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Contents B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 1 SKU Description and Supported Frequencies SKU Number Description Region Frequency HWIC-3G-GSM HSDPA/UMTS/EDGE/GPRS Worldwide 850/900/1800/1900 /2100 MHz HWIC-3G-CDMA-V EVDO Rev A/Rel 0/1xRTT US 800/1900MHz HWIC-3G-CDMA-S EVDO Rev A/Rel 0/1xRTT 800/1900MHz Feature History Release Modification Release # TBD This feature was introduc
PAGE 4
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Restrictions for the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L • Service availability on the HWIC and certification on the carrier network Restrictions for the Wireless WAN HWIC The following restrictions apply to the Cisco Wireless WAN HWICs: • Data connection can be originated only by the host platform call; the call by the other peer connected to the cellular network is not supported.
PAGE 5
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers How to Configure the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L Note To configure NAT on your router, see the NAT documentation, which is available at the following URL: http://www.cisco.com/en/US/tech/tk648/tk361/tk438/tsd_technology_support_sub-protocol_home.
PAGE 6
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers How to Configure the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L Activating a GSM Account The GSM WAN HWIC is equipped with a SIM card slot. The card is pre-provisioned and is available with cellular account-specific information. You must subscribe to a GSM service from a carrier to obtain this card. Configuring DDR To configure DDR on the interface, perform the steps in this section.
PAGE 7
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Configuration Examples for the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L Asynchronous Line and Reverse Telnet Each cellular interface has one TTY line associated with it. The line will allow you to use reverse telnet to the cellular modem located in the cellular HWIC. Note Reverse telnet to the modem is allowed only when the modem is not in the data connection.
PAGE 8
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Configuration Examples for the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L ! version 12.
PAGE 9
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Configuration Examples for the Wireless WAN HWIC B E TA D R A F T — C I S C O C O N F I D E N T I A L ! access-list 1 permit 20.0.0.0 0.0.255.
PAGE 10
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L dialer idle-timeout 2147000 dialer string cdma_1x dialer-group 1 async mode interactive no peer default ip address keepalive 5 3 no fair-queue ppp accm 0 no ppp lcp fast-start ppp chap hostname 4085267374vzw3g.com ppp chap password vzw Command Reference This section documents new commands only.
PAGE 11
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L cellular cdma profile create To create a new CDMA profile, enter the cellular cdma create profile command in privileged EXEC mode. cellular slot/wic_slot/port cdma profile create profile_number mdn min sid nid Syntax Description slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot, and port.
PAGE 12
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Beginning IOTA 2851-b1-sprint# Oct 27 00:02:44.595: Oct 27 00:02:44.595: Oct 27 00:02:44.595: 2851-b1-sprint# Oct 27 00:03:10.623: 2851-b1-sprint# Oct 27 00:03:14.987: Oct 27 00:03:22.375: Related Commands OTASP State = SPL unlock, Result = Successdeb modem OTASP State = Parameters commited to NVRAM, Result = Success IOTA Status Message Received.
PAGE 13
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L cellular cdma profile activate To activate an existing CDMA profile, use the cellular cdma profile activate command in EXEC mode. cellular slot/wic_slot/port cdma profile activate profile number Syntax Description slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot, and port.
PAGE 14
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L cellular cdma otasp To activate a cellular account using the over the air (OTA) procedure or over the air service provisioning (OTASP), use the cellular activate ota cdma|gsm command in EXEC mode.
PAGE 15
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages all To print all Cisco IOS driver debug messages, use the debug cellular messages all command in EXEC mode. debug cellular slot/wic_slot/port messages all Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 16
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages async To debug cellular async, use the debug cellular messages async command in EXEC mode. debug cellular slot/wic_slot/port messages async Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 17
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages data To print IOS data path debug messages, use the debug cellular messages data command in EXEC mode. show cellular slot/wic_slot/port messages data Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 18
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages dm To print Diagnostics Monitor (DM) messages from the Qualcomm CDMA chipset, use the debug cellular messages dm command in EXEC mode. debug cellular slot/wic_slot/port messages dm Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 19
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages management To print management path messages, such as CnS, use the debug cellular messages management command in EXEC mode. debug cellular slot/wic_slot/port messages management Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 20
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L debug cellular messages virt-con To redirect the Nios II console driver messages to display them in the Cisco IOS router console environment, use the debug cellular virt-con command in EXEC mode.
PAGE 21
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular all To display all the cellular information in one listing, use the show cellular all command in EXEC mode. show cellular slot/wic_slot/port all Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 22
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Inactivity Reason = Normal inactivate state Profile 2, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate state Profile 3, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate state Profile 4, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate state Profile 5, Packet Session Status = INACTIVE
PAGE 23
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Electronic Serial Number (ESN) = 0x6032692A Modem activated = NO Profile Prov Date MDN MSID ======= ========== =============== =========== 0 None 0000006458 0000006458 *1 None 8585551515 0000006951 * - Default Profile Data Connection Information =========================== Phone number of outgoing call = HDR AT State = Inactive, HDR Session State = O
PAGE 24
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L c2800# Related Commands Command Description cellular cdma otasp Displays the current active connection state and statistics. debug cellular messages all Displays the cellular modem hardware information. debug cellular messages data Displays the cellular network (base station) information.
PAGE 25
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular connection To display the current active connection state and statistics, use the show cellular connection command in EXEC mode. show cellular slot/wic_slot/port connection Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 26
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 2 Field Description Phone number of outgoing call Shows the phone number of the data call dialed. HDR AT State Indicates the AT state. Will show as CONNECTED when the CONNECT is received from the modem while dialing out. This is valid only for 1xEVDO. HDR Session State Will indicate as OPEN once the HDR session is established.
PAGE 27
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 2 Output Description (continued) Field Description Total Received Total number of KB received by the modem. This will be cleared on "clear counters". Total Call Duration Total duration of calls made from the modem. This will be updated when the current call in progress is disconnected.
PAGE 28
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Command Description debug cellular messages management Displays the cellular profile information. show cellular radio Displays the cellular modem radio statistics. show cellular security Displays the modem lock state. show controllers cellular Displays the SMS messages received by the cellular modem.
PAGE 29
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular connection personality To display the negotiated personalities when the 1xEVDO-Rev A service is acquired by the modem, use the show cellular connection personality command in EXEC mode. show cellular slot/wic_slot/port connection personality Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 30
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Related Commands Command Description cellular cdma profile activate Displays all the show cellular information in one listing. debug cellular messages all Displays the cellular modem hardware information. debug cellular messages data Displays the cellular network (base station) information.
PAGE 31
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular connection statistics single-user To display the forward traffic and control channel, use the show cellular connection statistics single-user command in EXEC mode. show cellular slot/wic_slot/port connection statistics single-user Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 32
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L 38.4 76.8 1024,16,1024 1024,8,512 0 0 0 0 Total Bad Packets Received = 0 Total Packets Received = 0 Packet Error Rate = 00.
PAGE 33
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular connection statistics multi-user To display the forward channle statistics for mulit-user traffic for the 1xEVDO-Rev A service, use the show cellular connection statistics multi-user command in EXEC mode.
PAGE 34
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L DRC_08 ( 921.6) DRC_10 (1228.8) DRC_13 (1536.0) Related Commands 0 0 0 0 0 0 Command Description cellular cdma profile activate Displays all the show cellular information in one listing. debug cellular messages all Displays the cellular modem hardware information.
PAGE 35
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular hardware To display the cellular modem hardware information, use the show cellular hardware command in EXEC mode. show cellular slot/wic_slot/port hardware Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 36
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 4 Output Description for show cellular hardware command for CDMA (continued) Field Description Preferred Roaming List (PRL) Version PRL version is unique to a service provider. This indicates to the modem which channels the modem should scan. Current Modem Temperature Radio temperature of the modem in celsius.
PAGE 37
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Command Description debug cellular messages management Displays the cellular profile information. show cellular radio Displays the cellular modem radio statistics. show cellular security Displays the modem lock state. show controllers cellular Displays the SMS messages received by the cellular modem.
PAGE 38
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular network To display the cellular network (base station) information, use the show cellular network command in EXEC mode. show cellular slot/wic_slot/port network Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 39
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 6 Output Description for show cellular hardware command for GSM (continued) Field Description Current BSS Longitude/Latitude Geographic location of the BSS (if this information is received from the BSS). Current System Time System time received from the base station.
PAGE 40
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 7 Related Commands Field Description Mobile Network Code Network code given by the base station. Only if the country code given by the base station matches the MCC of the IMSI and the network code given by the base station matches the MNC of the IMSI, the modem will be in the home network.
PAGE 41
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular profile To display the cellular profile information, use the show cellular profile command in EXEC mode. show cellular slot/wic_slot/port profile Syntax Description slot/wic_slot/port Command Default Profile 1 is the default for this command.
PAGE 42
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 8 Field Description (continued) Field Description ProvDate Date the modem was provisioned, in YYYY/MM/DD format. MDN Mobile Directory Number assigned to the modem by the carrier during provisioning.
PAGE 43
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 9 Related Commands Field Description (continued) Field Description Authentication PPP Authentication supported. CHAP and PAP are supported. The type of authentication to be used is provided by the service provider. Username Username to be used for PPP authentication. This information is provided by the service provider.
PAGE 44
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular radio To display the cellular modem radio statistics, use the show cellular radio command in user EXEC mode. show cellular slot/wic_slot/port radio [history] Syntax Description slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot, and port. history Displays the RSSI history.
PAGE 45
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 10 Output Description for show cellular radio command for CDMA Field Description Current RSSI Current radio signal strength in dbm (-125 dbm indicates no signal) Current ECIO Current energy per chip (ECIO) in dbm Current Channel Number Current channel number to which the modem is attached to the base station.
PAGE 46
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Command Description show interfaces cellular Displays statistics for the cellular interfaces. show run interface cellular Displays the current running configuration for the cellular interface.
PAGE 47
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show cellular security To display the modem lock state, use the show cellular security command in user EXEC mode. show cellular slot/wic_slot/port security Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 48
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Table 13 describes the output from this command: Table 13 Related Commands Filed Description Card Holder Verification If enabled, access to the SIM is restricted. For Enzo, it will always be disabled. SIM Status Indicates whether the SIM is present or removed from the SIM socket. SIM User Operation Required If the SIM is protected (e.g.
PAGE 49
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show controllers cellular To display high-speed WAN interface card (HWIC) hardware and driver specific information, use the show controllers cellular command in EXEC mode. show controllers cellular slot/wic_slot/port Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 50
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show interfaces cellular To display statistics for the cellular interfaces, use the show interfaces cellular command in EXEC mode. show interfaces cellular slot/wic_slot/port Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 51
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Related Commands Command Description cellular cdma profile activate Displays all the show cellular information in one listing. cellular cdma otasp Displays the current active connection state and statistics. debug cellular messages all Displays the cellular modem hardware information.
PAGE 52
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L show run interface cellular To see the current running configuration for the cellular interface, use the show run interface cellular command in EXEC mode. show run interface cellular slot/wic_slot/port Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 53
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L Related Commands Command Description cellular cdma profile activate Displays all the show cellular information in one listing. cellular cdma otasp Displays the current active connection state and statistics. debug cellular messages all Displays the cellular modem hardware information.
PAGE 54
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L test cellular cnm-process-enqueue To debug the control and management (CNM) process in the router, use the test cellular cnm-process-enqueue command in privileged EXEC mode. test cellular slot/wic_slot/port cnm-process-enqueue Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 55
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Command Reference B E TA D R A F T — C I S C O C O N F I D E N T I A L test cellular modem-power-cycle To recycle the power on the modem, use the test cellular modem-power-cycle command in privileged EXEC mode. The modem will disconnect the calls and then cycle the power. test cellular slot/wic_slot/port modem- power-cycle Syntax Description slot/wic_slot/port Command Default There is no default for this command.
PAGE 56
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Supported Standards, MIBs, and RFCs B E TA D R A F T — C I S C O C O N F I D E N T I A L test cellular modem-reset To do a software reset on the modem, use the test cellular modem-reset command in privileged EXEC mode. If a call is active, the modem will disconnect the call and then do a reset.
PAGE 57
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Troubleshooting B E TA D R A F T — C I S C O C O N F I D E N T I A L MIBs • TBD • TBD • TBD Troubleshooting If you are encoutering issues with your system, this section will help you troubleshoot and pinpoint the cause of failure.
PAGE 58
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Troubleshooting B E TA D R A F T — C I S C O C O N F I D E N T I A L • Profile created; antenna disconnected No profile created, Low RSSI The following is a sample output from this command if the antenna is disconnected and a profile has not been created.
PAGE 59
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Troubleshooting B E TA D R A F T — C I S C O C O N F I D E N T I A L =================== Current Service Status = No service, Service Error = None connected to the network.
PAGE 60
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Troubleshooting B E TA D R A F T — C I S C O C O N F I D E N T I A L Profile 1, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate Profile 2, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate Profile 3, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate Profile 4, Packet Session Status = INACTIVE Inactivity Reason = Normal inactivate Profile 5, Packet Session
PAGE 61
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Troubleshooting B E TA D R A F T — C I S C O C O N F I D E N T I A L Call Setup Using CHAT Script The following is a sample output when a call is set up using CHAT script. It shows a received ip address from network and call setup is successful and data path is open: Debugs debug debup debug debug debup modem chat ppp negotiation ppp event ppp error 3825_GSM_3# Nov 8 20:04:42.
PAGE 62
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Glossary B E TA D R A F T — C I S C O C O N F I D E N T I A L Nov 8 20:04:44.403: Ce0/3/0 Nov 8 20:04:44.403: Ce0/3/0 Nov 8 20:04:44.403: Ce0/3/0 Nov 8 20:04:44.403: Ce0/3/0 the cellular interface>" Nov 8 20:04:44.407: Ce0/3/0 Nov 8 20:04:44.407: Ce0/3/0 Nov 8 20:04:44.407: Ce0/3/0 Nov 8 20:04:44.407: Ce0/3/0 pap/chap succeeded Nov 8 20:04:44.407: Ce0/3/0 Nov 8 20:04:44.407: Ce0/3/0 Nov 8 20:04:44.
PAGE 63
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Glossary B E TA D R A F T — C I S C O C O N F I D E N T I A L CDMA—Code-Division Multiple Access. It is a technique for multiple-access digital communications that divides channels through unique code sequences. CLI—Command Line Interface. CN—Correspondence Node. DES—Data Encryption Standard. DSCP—Differentiated Services Code Point. ECIO—Also written as Ec/Io.
PAGE 64
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers Glossary B E TA D R A F T — C I S C O C O N F I D E N T I A L RED—Random Early Detection. RSSI—Receive Signal Strength Indicator. SIM—Subscriber Identity Module. TFTP—Trivial File Transfer Protocol. ToS—Type of Service. UMTS—Universal Mobile Telecommunications System. VPN—Virtual Private Network. WAN—Wide Area Network. WRED—Weighted Random Early Detection.