User Manual
Table Of Contents
- 3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers
- Contents
- Prerequisites for Configuring the Wireless WAN HWIC
- Restrictions for the Wireless WAN HWIC
- Information About the Wireless WAN HWIC
- How to Configure the Wireless WAN HWIC
- Configuration Examples for the Wireless WAN HWIC
- Command Reference
- cellular cdma profile create
- cellular cdma profile activate
- cellular cdma otasp
- debug cellular messages all
- debug cellular messages async
- debug cellular messages data
- debug cellular messages dm
- debug cellular messages management
- debug cellular messages virt-con
- show cellular all
- show cellular connection
- show cellular connection personality
- show cellular connection statistics single-user
- show cellular connection statistics multi-user
- show cellular hardware
- show cellular network
- show cellular profile
- show cellular radio
- show cellular security
- show controllers cellular
- show interfaces cellular
- show run interface cellular
- test cellular cnm-process-enqueue
- test cellular modem-power-cycle
- test cellular modem-reset
- Supported Standards, MIBs, and RFCs
- Troubleshooting
- Glossary
BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
11
Cisco IOS Release TBD
cellular cdma profile create
To create a new CDMA profile, enter the cellular cdma create profile command in privileged EXEC
mode.
cellular slot/wic_slot/port cdma profile create profile_number mdn min sid nid
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines The cdma profile create command is used to create a new CDMA profile for a cellular modem. Multiple
profiles can be created, but only one profile will be active at one time.
Examples The following example shows output of the cdma profile create command:
2851-b1-sprint#cellular 0/0/0 cdma prof create 0 9134390870 9132214671 4183 87 333830
Profile 0 will be Created and will become Active
Modem will be activated with following Parameters
MDN :9134390870; MSID :9132214671; SID :4183; NID 87:
Oct 27 00:02:34.051: Checking Current Activation Status
Oct 27 00:02:34.107: Modem activation status: Not Activated
Oct 27 00:02:34.107: Begin Activation
Oct 27 00:02:34.107: Beginning Profile Provisioning - Step 1 of 5
Oct 27 00:02:34.219: Beginning Profile Provisioning - Step 2 of 5
Oct 27 00:02:34.271: Beginning Profile Provisioning - Step 3 of 5
Oct 27 00:02:34.383: Beginning Profile Provisioning - Step 4 of 5
Oct 27 00:02:34.439: Beginning Profile Provisioning - Step 5 of 5
Oct 27 00:02:34.495: Secure Commit Result: Succeed (success for all non-provisioning
commit
Oct 27 00:02:34.495: Done Configuring the profile - Resetting the Modem
Oct 27 00:02:34.551: The Provisioning of the profile is Complete
Oct 27 00:02:37.547: %CELLWAN-2-MODEM_UP: Cellular0/1/0 modem is now UP
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
cdma profile create Displays a summary of the profile you create.
profile number The profile number you create.
mdn 10-digit mobile directory number
min 10-digit mobile identity number
sid System ID
nid Network ID
Release Modification
This command was introduced.