User Manual
Table Of Contents
- 3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers
- Contents
- Prerequisites for Configuring the Wireless WAN HWIC
- Restrictions for the Wireless WAN HWIC
- Information About the Wireless WAN HWIC
- How to Configure the Wireless WAN HWIC
- Configuration Examples for the Wireless WAN HWIC
- Command Reference
- cellular cdma profile create
- cellular cdma profile activate
- cellular cdma otasp
- debug cellular messages all
- debug cellular messages async
- debug cellular messages data
- debug cellular messages dm
- debug cellular messages management
- debug cellular messages virt-con
- show cellular all
- show cellular connection
- show cellular connection personality
- show cellular connection statistics single-user
- show cellular connection statistics multi-user
- show cellular hardware
- show cellular network
- show cellular profile
- show cellular radio
- show cellular security
- show controllers cellular
- show interfaces cellular
- show run interface cellular
- test cellular cnm-process-enqueue
- test cellular modem-power-cycle
- test cellular modem-reset
- Supported Standards, MIBs, and RFCs
- Troubleshooting
- Glossary
BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
12
Cisco IOS Release TBD
Beginning IOTA
2851-b1-sprint#
Oct 27 00:02:44.595: IOTA Status Message Received. Event: IOTA Start, Result: SUCCESS
Oct 27 00:02:44.595: Please wait till IOTA END message is received
Oct 27 00:02:44.595: It can take up to 5 minutes
2851-b1-sprint#
Oct 27 00:03:10.623: OTASP State = SPL unlock, Result = Successdeb modem
2851-b1-sprint#
Oct 27 00:03:14.987: OTASP State = Parameters commited to NVRAM, Result = Success
Oct 27 00:03:22.375: IOTA Status Message Received. Event: IOTA End, Result: SUCCESS
Related Commands Command Description
cellular cdma profile activate Activates an existing CDMA profile.
cellular cdma otasp Activates a cellular account using the over the air (OTA) procedure
or over the air service provisioning (OTASP)