User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
14
Cisco IOS Release TBD
cellular cdma otasp
To activate a cellular account using the over the air (OTA) procedure or over the air service provisioning
(OTASP), use the cellular activate ota cdma|gsm command in EXEC mode.
cellular slot/wic_slot/port cdma otasp phone_number
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines You can verify the profile data using the show cellular slot/wic_slot/port profile CLI.
Note Use this command only if you have an HWIC-CDMA-V for Verizon.
Examples The following example shows output of the for a CDMA account:
Enzo#cellular 0/3/0 cdma otasp *22899
Beginning OTASP activation
OTASP number is *22899
Enzo#
Enzo#
Nov 15 16:32:03.883: OTASP State = SPL unlock, Result = Success
Nov 15 16:32:23.935: OTASP State = PRL downloaded, Result = Success
Nov 15 16:32:24.783: OTASP State = Profile downloaded, Result = Success
Nov 15 16:32:24.783: OTASP State = MDN downloaded, Result = Success
Nov 15 16:32:28.711: OTASP State = Parameters commited to NVRAM, Result = Succes
c3845-1#
Related Commands
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
phone_number Phone number of the carrier that you must dial to begin activation using
OTASP. This number is provider-specific. For Verizon, it is *228 or *22899.
Release Modification
This command was introduced.
Command Description
cellular cdma profile create Creates a new CDMA profile.
cellular cdma profile activate Activates an existing CDMA profile.