User Manual
Table Of Contents
- 3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers
- Contents
- Prerequisites for Configuring the Wireless WAN HWIC
- Restrictions for the Wireless WAN HWIC
- Information About the Wireless WAN HWIC
- How to Configure the Wireless WAN HWIC
- Configuration Examples for the Wireless WAN HWIC
- Command Reference
- cellular cdma profile create
- cellular cdma profile activate
- cellular cdma otasp
- debug cellular messages all
- debug cellular messages async
- debug cellular messages data
- debug cellular messages dm
- debug cellular messages management
- debug cellular messages virt-con
- show cellular all
- show cellular connection
- show cellular connection personality
- show cellular connection statistics single-user
- show cellular connection statistics multi-user
- show cellular hardware
- show cellular network
- show cellular profile
- show cellular radio
- show cellular security
- show controllers cellular
- show interfaces cellular
- show run interface cellular
- test cellular cnm-process-enqueue
- test cellular modem-power-cycle
- test cellular modem-reset
- Supported Standards, MIBs, and RFCs
- Troubleshooting
- Glossary
BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
19
Cisco IOS Release TBD
debug cellular messages management
To print management path messages, such as CnS, use the debug cellular messages management
command in EXEC mode.
debug cellular slot/wic_slot/port messages management
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines Use this command for debugging purposes only.
Related Commands
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Command Description
debug cellular messages all Prints all Cisco IOS driver debug messages.
debug cellular messages async Debugs cellular async.
debug cellular messages data Prints Cisco IOS data path debug messages.
debug cellular messages virt-con Prints Diagnostics Monitor (DM) messages from the Qualcomm
CDMA chipset.
debug cellular messages virt-con Redirects the Nios II console driver messages to display them in the
Cisco IOS router console environment.