User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
27
Cisco IOS Release TBD
The following example shows output for global system for mobile communication (GSM):
# show cellular 1/0/1 connection
Data Transmitted = 1066807500 bytes, Received = 1066807500 bytes
Profile 1, Packet Session Status = ACTIVE
IP address = 1.5.97.2
Profile 2, Packet Session Status = INACTIVE
Inactivity Reason = Normal inactivate state
Table 9 describes the output for the GSM command:
Related Commands
Total Received Total number of KB received by the modem. This
will be cleared on "clear counters".
Total Call Duration Total duration of calls made from the modem.
This will be updated when the current call in
progress is disconnected.
Current Call State Indicates the type of call made. Since Enzo
supports only data calls dialed using chat script,
this will show as AT Packet Call.
Last Call Disconnect Reason Indicates why the last call was disconnected.
Last Connection Error Indicates the error code if the call status indicates
error.
Mobile IP Error Code Indicates the error code as per RFC-2002 if the
call is a mobile IP call.
Table 2 Output Description (continued)
Field Description
Table 3 Output Description
Field Description
Data Transmitted Total data transmitted by the modem. Can be
cleared by the clear counters command.
Data Received Total data received by the modem. Can be cleared
by the clear counters command.
Profile <profile number> Indicates the profiles configured in the modem.
Total of 16 profiles can be configured
Packet Session Status PDP session status of the profile. Active when the
call is made and PDP context has become active
in the modem.
IP Address IP address of the cellular interface received during
IPCP negotiation
Inactivity Reason Reason why the profile is inactive.
Command Description
cellular cdma profile activate Displays all the show cellular information in one listing.
debug cellular messages all Displays the cellular modem hardware information.
debug cellular messages data Displays the cellular network (base station) information.