User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
29
Cisco IOS Release TBD
show cellular connection personality
To display the negotiated personalities when the 1xEVDO-Rev A service is acquired by the modem, use
the show cellular connection personality command in EXEC mode.
show cellular slot/wic_slot/port connection personality
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines None
Examples The following example shows output for code division multiple access (CDMA) for slot 0, WIC slot 0,
port 0:
c2800#sh cellular 0/0/0 connection personality
Current Active Personality = Personality1
Personality 1:
=============
Physical Layer Protocol =
Control Channel MAC Protocol =
Access Channel MAC Protocol =
Forward Traffic Channel MAC Protocol =
Reverse Traffic Channel MAC Protocol =
Key Exchange Protocol =
Authentication Protocol =
Encryption Protocol =
Security Protocol =
Idle State Protocol =
Generic Multimode Capability Discovery Protocol =
Generic Virtual Stream Protocol =
Other Negotiated Personalities
==============================
Personality 2:
=============
Stream 0 Application Subtype =
Stream 1 Application Subtype =
Stream 2 Application Subtype =
Stream 3 Application Subtype =
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.