User Manual
Table Of Contents
- 3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers
- Contents
- Prerequisites for Configuring the Wireless WAN HWIC
- Restrictions for the Wireless WAN HWIC
- Information About the Wireless WAN HWIC
- How to Configure the Wireless WAN HWIC
- Configuration Examples for the Wireless WAN HWIC
- Command Reference
- cellular cdma profile create
- cellular cdma profile activate
- cellular cdma otasp
- debug cellular messages all
- debug cellular messages async
- debug cellular messages data
- debug cellular messages dm
- debug cellular messages management
- debug cellular messages virt-con
- show cellular all
- show cellular connection
- show cellular connection personality
- show cellular connection statistics single-user
- show cellular connection statistics multi-user
- show cellular hardware
- show cellular network
- show cellular profile
- show cellular radio
- show cellular security
- show controllers cellular
- show interfaces cellular
- show run interface cellular
- test cellular cnm-process-enqueue
- test cellular modem-power-cycle
- test cellular modem-reset
- Supported Standards, MIBs, and RFCs
- Troubleshooting
- Glossary
BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Contents
3
Cisco IOS Release TBD
Feature History
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
Contents
• Prerequisites for Configuring the Wireless WAN HWIC, page 3
• Restrictions for the Wireless WAN HWIC, page 4
• Information About the Wireless WAN HWIC, page 4
• How to Configure the Wireless WAN HWIC, page 4
• Configuration Examples for the Wireless WAN HWIC, page 7
• Command Reference, page 10
• Supported Standards, MIBs, and RFCs, page 56
• Troubleshooting, page 57
• Glossary, page 62
Prerequisites for Configuring the Wireless WAN HWIC
The following are prerequisites to configuring the Wireless WAN HWICs:
• Familiarity with Cisco IOS
• Use of the Cisco IOS T-release, beginning with release TBD or later for Cisco HWIC support. (Refer
to the Cisco IOS documentation.)
• HWIC must be supported by a carrier. Please see data sheet for a list of supported carriers.
Table 1 SKU Description and Supported Frequencies
SKU Number Description Region Frequency
HWIC-3G-GSM HSDPA/UMTS/EDGE/GPRS Worldwide 850/900/1800/1900
/2100 MHz
HWIC-3G-CDMA-V EVDO Rev A/Rel 0/1xRTT US 800/1900MHz
HWIC-3G-CDMA-S EVDO Rev A/Rel 0/1xRTT 800/1900MHz
Release Modification
Release # TBD This feature was introduced.










