User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
35
Cisco IOS Release TBD
show cellular hardware
To display the cellular modem hardware information, use the show cellular hardware command in
EXEC mode.
show cellular slot/wic_slot/port hardware
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines The command usage is the same for GSM and CDMA, though the output is different for each.
Examples The following example shows output for code division multiple access (CDMA) for slot 0, WIC slot 0,
port 0:
# show cellular 0/0/0 hardware
Modem Firmware Version = p2005300
Modem Firmware built = 09-13-06
Hardware Version = 1.0
Electronic Serial Number (ESN) = 0x6032692A
Preferred Roaming List (PRL) Version = 10
Current Modem Temperature = 31 degrees Celsius
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Table 4 Output Description for show cellular hardware command for CDMA
Field Description
Modem Firmware Version Firmware version of the modem.
Modem Firmware Built Date firmware was built in mm-dd-yy format
Hardware Version Modem hardware version.
Electronic Serial Number Unique serial number of the modem.