User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
39
Cisco IOS Release TBD
The following example shows output for global system for mobile communication (GSM) for slot 0,
WIC slot 0, port 0:
# show cellular 0/0/0 network
Current Service Status = Normal, Service Error = None
Current Service = Combined
Packet Service = UMTS/WCDMA (Attached)
Packet Session Status = Inactive
Current Roaming Status = Roaming
Network Selection Mode = Automatic
Country = USA, Network = CINGULAR
Mobile Country Code (MCC) = 310
Mobile Network Code (MNC) = 380
Location Area Code (LAC) = 56997
Routing Area Code (RAC) = 253
Cell ID = 4503
Primary Scrambling Code = 169
PLMN Selection = Automatic
Registered PLMN = Cingular , Abbreviated =
Service Provider =
Current BSS Longitude/Latitude Geographic location of the BSS (if this
information is received from the BSS).
Current System Time System time received from the base station.
Table 6 Output Description for show cellular hardware command for GSM (continued)
Field Description
Table 7 Output Description for show cellular hardware command for GSM
Field Description
Current Service Status Indicates whether service is available.
Current Service Error Shows the error in case there is no service
Current Idle Digital Mode Idle mode of the modem.
Packet Service Indicates the type of service available. For normal
operation, the modem should be attached.
Packet Session Status Status of PDP session. When data transfer is
taking place, packet session will be active.
Current Roaming Status Indicates whether the modem is in the home
network or roaming.
Network Selection Mode Can be manual or automatic selection mode. Set
to automatic by default.
Country Country string given by the base station.
Network Network string given by the base station.
Mobile Country Code Country code given by the base station. Only if
the country code given by the base station
matches the MCC of the IMSI and the network
code given by the base station matches the MNC
of the IMSI, the modem will be in the home
network.