User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
41
Cisco IOS Release TBD
show cellular profile
To display the cellular profile information, use the show cellular profile command in EXEC mode.
show cellular slot/wic_slot/port profile
Syntax Description
Command Default Profile 1 is the default for this command.
Command Modes EXEC
Command History
Usage Guidelines The command usage is the same for GSM and CDMA, though the output is different for each.
Examples The following example shows output for code division multiple access (CDMA) for slot 0, WIC slot 1,
port 1:
# show cellular 0/1/1 profile
Electronic Serial Number (ESN) = 12637162381
Modem activated = YES
Profile Prov Date MDN MIN
======= ========== =============== ===========
*1 2005/04/10 123456789012345 1234567890
2 2005/01/10 687679789898977 7877886775
“*” indicates the default profile.
Table 8 describes the output fields from the command for CDMA:
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Table 8 Field Description
Field Description
Electronic Serial Number A unique serial number of the CDMA modem.
Modem Activated Indicates the activation status of the modem.
Yes
indicates that
the modem is activated by the carrier.
Profile Profile supported by MC57xx modems.
Note MC57xx modems support two profiles.
Only one profile can be active at a time.