User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
42
Cisco IOS Release TBD
The following example shows output for global system for mobile communication (GSM) for slot 0,
WIC slot 1, port 1:
# show cellular 0/1/1 profile
Profile 1 = ACTIVE
--------
PDP Type = IPv4, Header Compression = ON
Data Compression = ON
PDP address = 0x7F000201
Access Point Name (APN) = enzo.cisco.com
Authentication = CHAP
Username: cisco, Password: lab
Primary DNS address = 127.0.2.1
Source Address = 127.0.2.1 255.255.255.0
Profile 2 = INACTIVE
---------
PDP Type = IPv4, Header Compression = ON
Data Compression = ON
PDP address = 0x7F000202
Access Point Name (APN) = enzo.cingular.com
Authentication = CHAP
Username: cisco, Password: lab
Primary DNS address = 127.0.2.1
Source Address = 127.0.2.2 255.255.255.0
Table 9 describes the output for the GSM modem:
Field Description
ProvDate Date the modem was provisioned, in
YYYY/MM/DD format.
MDN Mobile Directory Number assigned to the modem
by the carrier during provisioning.
MIN Mobile Identity Number assigned to the modem
by the carrier during provisioning
Table 8 Field Description (continued)
Field Description
Table 9 Field Description
Field Description
Profile <number> Shows whether a particular profile is ACTIVE or
INACTIVE. The profile is ACTIVE when the
PDP context is active. This happens when a data
call is successfully established.
PDP Type Indicates the PDP type. Supported type is IPv4.
PDP Address Shows the IP address assigned for the PDP
context during PPP negotiation
Access Point Name PDP AddressAccess Point Name for the profile
This information is provided by the service
provider.