User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
45
Cisco IOS Release TBD
The following example shows output for global system for mobile communication (GSM) for slot 0,
WIC slot 0, port 0:
# show cellular 0/0/0 radio
Current Band = WCDMA 1900, Channel Number = 9721
Current RSSI(RSCP) = -91 dBm
Related Commands
Table 10 Output Description for show cellular radio command for CDMA
Field Description
Current RSSI Current radio signal strength in dbm (-125 dbm
indicates no signal)
Current ECIO Current energy per chip (ECIO) in dbm
Current Channel Number Current channel number to which the modem is
attached to the base station.
Current Channel State Indicates whether the modem is scanning or has
acquired the channel
Current Band Class Band class attached
Sector ID Sector ID of the base station to which the modem
is attached
Subnet Mask Subnet mask of the sector
Color Code Color code of the sector
PN Offset PN offset for the sector
Rx Gain Control Rx gain control for the modem
Tx Total Power Transmitted power
Table 11 Output Description for show cellular radio command for GSM
Field Description
Current Band Band attached by the modem
Channel Number Channel number attached by the modem
Current RSSI Current radio signal strength received by the
modem
Command Description
cellular cdma profile activate Displays all the show cellular information in one listing.
cellular cdma otasp Displays the current active connection state and statistics.
debug cellular messages all Displays the cellular modem hardware information.
debug cellular messages data Displays the cellular network (base station) information.
show cellular security Displays the modem lock state.
show controllers cellular Displays the SMS messages received by the cellular modem.