User Manual
Table Of Contents
- 3G Wireless High-Speed WAN Interface Card for Cisco1800, 2800, and 3800 Series Routers
- Contents
- Prerequisites for Configuring the Wireless WAN HWIC
- Restrictions for the Wireless WAN HWIC
- Information About the Wireless WAN HWIC
- How to Configure the Wireless WAN HWIC
- Configuration Examples for the Wireless WAN HWIC
- Command Reference
- cellular cdma profile create
- cellular cdma profile activate
- cellular cdma otasp
- debug cellular messages all
- debug cellular messages async
- debug cellular messages data
- debug cellular messages dm
- debug cellular messages management
- debug cellular messages virt-con
- show cellular all
- show cellular connection
- show cellular connection personality
- show cellular connection statistics single-user
- show cellular connection statistics multi-user
- show cellular hardware
- show cellular network
- show cellular profile
- show cellular radio
- show cellular security
- show controllers cellular
- show interfaces cellular
- show run interface cellular
- test cellular cnm-process-enqueue
- test cellular modem-power-cycle
- test cellular modem-reset
- Supported Standards, MIBs, and RFCs
- Troubleshooting
- Glossary
BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
48
Cisco IOS Release TBD
Table 13 describes the output from this command:
Related Commands
Table 13 Output Description
Filed Description
Card Holder Verification If enabled, access to the SIM is restricted. For
Enzo, it will always be disabled.
SIM Status Indicates whether the SIM is present or removed
from the SIM socket.
SIM User Operation Required If the SIM is protected (e.g., because of CHV1
enabled), it will indicate the type of user operation
required.
Number of Retries Remaining Indicates the number of attempts remaining in
case the SIM is locked. If the number of retries
becomes zero, the SIM is blocked and becomes
unusable.
Command Description
cellular cdma profile activate Displays all the show cellular information in one listing.
cellular cdma otasp Displays the current active connection state and statistics.
debug cellular messages all Displays the cellular modem hardware information.
debug cellular messages data Displays the cellular network (base station) information.
show cellular radio Displays the cellular modem radio statistics.
show controllers cellular Displays the SMS messages received by the cellular modem.
show interfaces cellular Displays statistics for the cellular interfaces.
show run interface cellular Displays the current running configuration for the cellular
interface.










