User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
49
Cisco IOS Release TBD
show controllers cellular
To display high-speed WAN interface card (HWIC) hardware and driver specific information, use the
show controllers cellular command in EXEC mode.
show controllers cellular slot/wic_slot/port
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines Use this command to capture the output for debugging or troubleshooting purposes only.
Examples The output is variable.
Related Commands
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Command Description
cellular cdma profile activate Displays all the show cellular information in one listing.
cellular cdma otasp Displays the current active connection state and statistics.
debug cellular messages all Displays the cellular modem hardware information.
debug cellular messages data Displays the cellular network (base station) information.
show cellular radio Displays the cellular modem radio statistics.
show cellular security Displays the modem lock state.
show interfaces cellular Displays statistics for the cellular interfaces.
show run interface cellular Displays the current running configuration for the cellular
interface.