User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
52
Cisco IOS Release TBD
show run interface cellular
To see the current running configuration for the cellular interface, use the show run interface cellular
command in EXEC mode.
show run interface cellular slot/wic_slot/port
Syntax Description
Command Default There is no default for this command.
Command Modes EXEC
Command History
Usage Guidelines None
Examples The following example shows the output of the command for slot 0, WIC slot 2, port 0:
c2800#sh running-config interface cellular 0/2/0
Building configuration...
Current configuration : 278 bytes
!
interface Cellular0/2/0
ip address negotiated
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 2147000
dialer string umts
dialer-group 1
async mode interactive
no peer default ip address
ppp chap hostname bombor
ppp chap password 0 enzo
end
c2800#
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.