User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Command Reference
54
Cisco IOS Release TBD
test cellular cnm-process-enqueue
To debug the control and management (CNM) process in the router, use the test cellular
cnm-process-enqueue command in privileged EXEC mode.
test cellular slot/wic_slot/port cnm-process-enqueue
Syntax Description
Command Default There is no default for this command.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to capture output for debugging. After you enter the command, make sure you see the
modem upmessage on the console. This indicates that the modem has booted properly.
Examples The following example resets the modem for slot 0, WIC_slot 1, port 1:
c2800#test cellular 0/2/0 cnm-process-enqueue messages ?
<0-5> 0 - Heartbeat, 1 - Call disc, 2 - too hot,
3 - reset, 4 - modem up, 5 - undefined
Related Commands
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Command Description
test cellular modem-power-cycle Displays modem power cycle.
test cellular modem-reset Resets modem.