User Manual

BETA DRAFT —CISCO CONFIDENTIAL
3G Wireless High-Speed WAN Interface Card for Cisco 1800, 2800, and 3800 Series Routers
Supported Standards, MIBs, and RFCs
56
Cisco IOS Release TBD
test cellular modem-reset
To do a software reset on the modem, use the test cellular modem-reset command in privileged EXEC
mode. If a call is active, the modem will disconnect the call and then do a reset.
test cellular slot/wic_slot/port modem- reset
Syntax Description
Command Default There is no default for this command.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to capture output for debugging. After you enter the command, make sure you see the
modem UP message on the console. This indicates that the modem has booted properly.
Examples The following example resets the modem for slot 0, WIC_slot 1, port 1:
# test cellular 0/1/1 modem-reset
Modem reset successfully
#
Related Commands
Supported Standards, MIBs, and RFCs
The following section will provide references related to the HWIC:
Standards
• TBD
• TBD
slot/wic_slot/port Numeric values that indicate the router slot, WAN interface card (WIC) slot,
and port.
Release Modification
This command was introduced.
Command Description
test cellular cnm-process-enqueue Enqueues to CNM process.
test cellular modem-power-cycle Displays modem power cycle.