User's Manual

4-10
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 4 Configuring Radio Settings
Configuring Radio Channel Settings
Defaults
Command Modes Configuration interface
ExamplesThis example shows how to set the channel spacing to 5-MHz spacing and channel number to 13 on a
root device.
WMIC(config-if)# spacing5channel 13
This example shows how to set the channel spacing to 10-MHz spacing and center frequency to
4982.5-MHz spacing on a root device. (Note that the command requires that the entry be 4982, as
opposed to 4982.5.)
WMIC(config-if)# spacing 10 channel 4982
This example shows how to set the channel spacing 5-MHz spacing on a non-root device.
WMIC(config-if)# spacing 5
Related Commands
Table 4-2 Channels, Center Frequencies, and Channel Widths
Channel Center Frequency Channel Width
1 4940.5 not supported
2 4941.5 not supported
3 4942.5 5-MHz
4 4943.5 not supported
5 4944.5 not supported
6 4947.5 5-MHz
7 4952.5 5-MHz or 10-MHz
8 4957.5 5-MHz
9 4962.5 5-MHz or 10-MHz
10 4967.5 5-MHz
11 4972.5 5-MHz or10-MHz
12 4977.5 5-MHz
13 4982.5 5-MHz or 10-MHz
14 4985.5 not supported
15 4986.5 5-MHz
16 4987.5 not supported
17 4988.5 not supported
18 4989.5 not supported
Command Description
show controllers dot11radio 0 Display the radio controller information and status.