User's Manual

Contents
xii
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
CHAPTER 16 Configuring System Message Logging 15-1
Understanding System Message Logging 15-2
Configuring System Message Logging 15-2
System Log Message Format 15-2
Default System Message Logging Configuration 15-4
Disabling and Enabling Message Logging 15-4
Setting the Message Display Destination Device 15-5
Enabling and Disabling Timestamps on Log Messages 15-6
Enabling and Disabling Sequence Numbers in Log Messages 15-6
Defining the Message Severity Level 15-7
Limiting Syslog Messages Sent to the History Table and to SNMP 15-8
Setting a Logging Rate Limit 15-9
Configuring UNIX Syslog Servers 15-10
Logging Messages to a UNIX Syslog Daemon 15-10
Configuring the UNIX System Logging Facility 15-10
Displaying the Logging Configuration 15-12
CHAPTER 17 Wireless Device Troubleshooting 16-1
Checking the LED Indicators 16-2
Checking Basic Settings 16-3
SSID 16-3
WEP Keys 16-3
Security Settings 16-3
Resetting to the Default Configuration 16-4
Using the Web Browser Interface 16-4
Using the CLI 16-5
Reloading the Image 16-6
Using the Web Browser Interface 16-6
Browser HTTP Interface 16-6
Browser TFTP Interface 16-7
Using the CLI 16-7
Obtaining the Image File 16-9
Obtaining TFTP Server Software 16-9
Reloading the Bootloader Image 16-10
APPENDIX A Connecting to the Cisco 3200 Series Router and Using the Command-Line Interface A-1
Before You Start A-2
Resetting the WMIC to the Default Settings A-2