User's Manual

4-20
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 4 Configuring Radio Settings
Performing a Carrier Busy Test
Performing a Carrier Busy Test
You can perform a carrier busy test to check the radio activity on the channels. During the carrier busy
test, the WMIC drops all associations with wireless networking devices for around 4 seconds while it
conducts the carrier test and then displays the test results.
In privileged EXEC mode, enter this command to perform a carrier busy test:
dot 11 dot11Radio interface-number carrier busy
where, interface-number is the dot11radio interface.
Use the show dot11 carrier busy command to re-display the carrier busy test results.