User's Manual

6-15
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 6 Configuring Spanning Tree Protocol
Displaying Spanning-Tree Status
Displaying Spanning-Tree Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in Table 6-3:
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the Cisco IOS Command Reference for Cisco Access Points and Bridges.
Table 6-3 Commands for Displaying Spanning-Tree Statusbridge
Command Purpose
show spanning-tree Displays information on your network’s spanning tree.
show spanning-tree blocked-ports Displays a list of blocked ports on this device.
show spanning-tree bridge Displays status and configuration of this bridge.
show spanning-tree active Displays spanning-tree information on active interfaces only.
show spanning-tree root Displays a detailed summary of information on the spanning-tree root.
show spanning-tree interface interface-id Displays spanning-tree information for the specified interface.
show spanning-tree summary [totals] Displays a summary of port states or displays the total lines of the STP state
section.