User's Manual

xvi
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Preface
Organization
Chapter 5, “Configuring SSIDs,” describes how to configure and manage multiple service set identifiers
(SSIDs). You can configure up to 16 SSIDs and assign different configuration settings to each SSID.
Chapter 6, “Configuring Spanning Tree Protocol,” descibes how to configure Spanning Tree Protocol
(STP). STP prevents data loops in your network.
Chapter 7, “Configuring WEP and WEP Features,” describes how to configure the cipher suites required
to use authenticated key management, Wired Equivalent Privacy (WEP), and WEP features including
MIC, CMIC, TKIP, CKIP, and broadcast key rotation.
Chapter 8, “Configuring Authentication Types,” describes how to configure authentication types. Client
devices use these authentication methods to join your network.
Chapter 9, “Configuring WDS, Fast Secure Roaming, and Radio Management,” describes Wireless
Domain Services (WDS), fast secure roaming, and radio management features. The chapter also
provides instructions for configuring the WMIC to register with a WDS access point.
Chapter 10, “Configuring VLANs,” describes how to configure your WMIC to interoperate with the
VLANs set up on your wired LAN.
Chapter 11, “Configuring QoS in a Wireless Environment,” describes how to configure quality of service
(QoS) on your WMIC. With this feature, you can provide preferential treatment to certain traffic at the
expense of others.
Chapter 12, “Configuring Filters,” describes how to configure and manage MAC address, IP, and
Ethertype filters on the WMICWMIC by using the web-browser interface.
Chapter 13, “Configuring CDP,” describes how to configure Cisco Discovery Protocol (CDP) on your
WMIC. CDP is a device-discovery protocol that runs on all Cisco network equipment.
Chapter 14, “Configuring SNMP,” describes how to configure the Simple Network Management
Protocol (SNMP) on your WMIC.
Chapter 15, “Managing Firmware and Configurations,” describes how to manipulate the Flash file
system, how to copy configuration files, and how to archive (upload and download) software images.
Chapter 16, “Configuring System Message Logging,” describes how to configure system message
logging on your WMIC.
Chapter 17, “Wireless Device Troubleshooting,” describes basic troubleshooting procedures.
Appendix A, “Connecting to the Cisco 3200 Series Router and Using the Command-Line Interface,”
describes how to use the command-line interface (CLI) to configure the WMIC.
Appendix B, “Channels and Antenna Settings,” lists the WMIC radio channels and the maximum power
levels supported by the world’s regulatory domains.
Appendix C, “Protocol Filters,” lists some of the protocols that you can filter on the WMIC.
Appendix D, “MIB List,” lists the Simple Network Management Protocol (SNMP) Management
Information Bases (MIBs) that the WMIC supports.
Appendix E, “Error and Event Messages,” lists the CLI error and event messages and provides an
explanation and recommended action for each message.