User's Manual

8-12
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 8 Configuring Authentication Types
Matching Authentication Types on Root and Non-Root Bridges
LEAP Example Configurations
Workgroup Bridge
aaa new-model
!
aaa group server radius rad_eap
server 172.16.8.151 auth-port 1645 acct-port 1646
!
aaa authentication login eap_methods group rad_eap
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 128bit 0 123456789012334567890123456 transmit-key
encryption mode wep mandatory
!
ssid silicon_beach_hotspot
authentication network-eap eap_methods
authentication client username officer1 password 0 beach123
Access Point
aaa new-model
!
aaa group server radius rad_eap
server 172.16.8.151 auth-port 1645 acct-port 1646
!
aaa authentication login eap_methods group rad_eap
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption key 1 size 128bit 7 A56C276D6B9560D2F4267B256926 transmit-key
encryption mode wep mandatory
!
ssid silicon_beach_wep
authentication network-eap eap_methods
CCKM key management Set up and enable WEP and enable
CCKM authentication
Set up and enable WEP and enable
CCKM authentication, configure
the root bridge to interact with your
WDS device, and add the root
bridge to your authentication server
as a client device
WPA key management Set up and enable WEP and enable
WPA authentication
Set up and enable WEP and enable
WPA authentication
Table 8-2 Client and Bridge Security Settings (continued)
Security Feature Non-Root Bridge Setting Root Bridge Setting