User's Manual
9-6
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 9 Configuring WDS, Fast Secure Roaming, and Radio Management
Configuring WDS and Fast Secure Roaming
Also, to configure an access point to use a WDS access point, the access point must be configured for
an encryption cipher and authentication methods. For example:
encryption mode ciphers ckip-cmic
!
ssid kin_leap
authentication network-eap eap_methods
authentication key-management cckm
Refer to the “Configuring Authentication Types” chapter for more information.
Configuring the Authentication Server to Support Fast Secure Roaming
The WDS access point and all access points participating in CCKM must authenticate to your
authentication server. On your server, you must configure usernames and passwords for the access points
and a username and password for the WDS access point.
Follow these steps to configure the access points on your server:
Step 1 Log into Cisco Secure ACS and click Network Configuration to browse to the Network Configuration
page. You must use the Network Configuration page to create an entry for the WDS access point.
Figure 9-3 shows the Network Configuration page.
Figure 9-3 Network Configuration Page
Step 2
Click Add Entry under the AAA Clients table. The Add AAA Client page appears. Figure 9-4 shows
the Add AAA Client page.