User's Manual

9-7
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 9 Configuring WDS, Fast Secure Roaming, and Radio Management
Configuring WDS and Fast Secure Roaming
Figure 9-4 Add AAA Client Page
Step 3
In the AAA Client Hostname field, enter the name of the WDS access point.
Step 4 In the AAA Client IP Address field, enter the IP address of the WDS access point.
Step 5 In the Key field, enter exactly the same password that is configured on the WDS access point.
Step 6 From the Authenticate Using drop-down menu, select RADIUS.
Step 7 Click Submit.
Step 8 Repeat Step 2 through Step 7 for each WDS access point candidate.
Step 9 Click User Setup to browse to the User Setup page. You must use the User Setup page to create entries
for the access points that use the WDS access point. Figure 9-5 shows the User Setup page.