User's Manual

9-9
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 9 Configuring WDS, Fast Secure Roaming, and Radio Management
Configuring WDS and Fast Secure Roaming
Step 13 Select CiscoSecure Database from the Password Authentication drop-down menu.
Step 14 In the Password and Confirm Password fields, enter exactly the same password that you entered on the
access point on the Wireless Services AP page.
Step 15 Click Submit.
Step 16 Repeat Step 10 through Step 15 for each access point that uses the WDS access point.
Step 17 Browse to the System Configuration page, click Service Control, and restart ACS to apply your entries.
Figure 9-7 shows the System Configuration page.
Figure 9-7 ACS System Configuration Page
CLI Commands to Enable the WDS Server
The following CLI commands are required to enable the WDS server. The no form of the commands
disables the WDS server. The same configuration applies for Central WDS server and per subnet WDS
server.
[no] wlccp wds priority <1-255> interface BVI1
[no] wlccp authentication-server infrastructure <method_infra>
where <method_infra> is <authentication server list name>
[no] wlccp authentication-server client [any | eap | leap | mac] <method_client>
where <method_ client > is <authentication server list name>
[no] aaa group server radius infra
[no] server <IP address of RADIUS server> auth-port <Port number> acct-port <Port
number>
[no] aaa group server radius client
[no] server <IP address of RADIUS server> auth-port <Port number> acct-port <Port
number>
[no] aaa authentication login <method_infra> group infra
where <method_infra> is <named authentication list>
[no] aaa authentication login <method_client> group client