User's Manual

10-7

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-7734-02

Chapter 10 Configuring VLANs

Configuring VLANs

Viewing VLANs Configured on the WMIC

In privileged EXEC mode, use the show vlan command to view the VLANs that the WMIC supports.

This is sample output from a show vlan command:

Virtual LAN ID: 1 (IEEE 802.1Q Encapsulation)

vLAN Trunk Interfaces: Dot11Radio0

FastEthernet0

Virtual-Dot11Radio0

This is configured as native Vlan for the following interface(s) :

Dot11Radio0

FastEthernet0

Virtual-Dot11Radio0

Protocols Configured: Address: Received: Transmitted:

Bridging Bridge Group 1 201688 0

Virtual LAN ID: 2 (IEEE 802.1Q Encapsulation)

vLAN Trunk Interfaces: Dot11Radio0.2

FastEthernet0.2

Virtual-Dot11Radio0.2

Protocols Configured: Address: Received: Transmitted: