User's Manual

11-5
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 11 Configuring QoS in a Wireless Environment
Configuring QoS
Figure 11-1 QoS Policies Page
Step 3
With <NEW> selected in the Create/Edit Policy field, type a name for the QoS policy in the Policy Name
entry field. The name can contain up to 25 alphanumeric characters. Do not include spaces in the policy
name.
Step 4 If the packets that you need to prioritize contain IP precedence information in the IP header TOS field,
select an IP precedence classification from the IP Precedence drop-down menu. Menu selections include:
• Routine (0)
• Priority (1)
• Immediate (2)
• Flash (3)
• Flash Override (4)
• Critic/CCP (5)
• Internet Control (6)
• Network Control (7)
Step 5 Use the Apply Class of Service drop-down menu to select the class of service that the WMIC will apply
to packets of the type that you selected from the IP Precedence menu. The WMIC matches your IP
Precedence selection with your class of service selection. Settings in the Apply Class of Service menu
include:
• Best Effort (0)