User's Manual

14-8
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 14 Configuring SNMP
Configuring SNMP
Some notification types cannot be controlled with the snmp-server enable global configuration
command, such as tty and udp-port. These notification types are always enabled. You can use the
snmp-server host global configuration command to a specific host to receive the notification types
listed in Table 14-3.
Table 14-3 Notification Types
Notification Type Description
authenticate-fail Enable traps for authentication failures.
config Enable traps for SNMP configuration changes.
deauthenticate Enable traps for client device deauthentications.
disassociate Enable traps for client device disassociations.
dot11-qos Enable traps for QoS changes.
entity Enable traps for SNMP entity changes.
envmon temperature Enable traps for monitoring radio temperature. This trap is sent out when the
WMIC radio temperature approaches the limits of its operating range.
snmp Enable traps for SNMP events.
syslog Enable syslog traps.
wlan-wep Enable WEP traps.