User's Manual

17-9
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 17 Wireless Device Troubleshooting
Reloading the Image
extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_last_flat.gif (318
bytes)
extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_button_nth.gif (1177 bytes)
extracting c350-k9w7-mx.122-13.JA1/html/level1/images/apps_leftnav_dkgreen.gif (869 bytes)
-- MORE --
Note If you do not press the spacebar to continue, the process eventually times out and the wireless
device stops inflating the image.
Step 8 Enter the set BOOT command to designate the new image as the image that the wireless device uses
when it reboots. The wireless device creates a directory for the image that has the same name as the
image, and you must include the directory in the command. Your entry might look like this example:
ap: set BOOT flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1
Step 9 Enter the set command to check your bootloader entries.
ap: set
BOOT=flash:/c350-k9w7-mx.122-13.JA1/c350-k9w7-mx.122-13.JA1
DEFAULT_ROUTER=192.168.133.1
IP_ADDR=192.168.133.160
NETMASK=255.255.255.0
Step 10 Enter the boot command to reboot the wireless device. When the wireless device reboots, it loads the
new image.
ap: boot
Obtaining the Image File
You can obtain the wireless device image file from the Cisco.com software center by following these
steps:
Step 1 Use your Internet browser to access the Cisco Software Center at the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2 Find the wireless device firmware and utilities section and click on the link for the wireless device.
Step 3 Double-click the latest firmware image file for wireless devices.
Step 4 Download the image file to a directory on your PC hard drive.
Obtaining TFTP Server Software
You can download TFTP server software from several websites. Cisco recommends the shareware TFTP
utility available at this URL:
http://tftpd32.jounin.net
Follow the instructions on the website for installing and using the utility.