User's Manual

1-6
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 1 Overview
Features
distance
command
(minimizes delay
propagation)
Supported Supported Formula to minimize the delay propagation
will be added to the dot11 interface
distance command
World Mode Supported Not supported
HTML-Based
User Interface
Supported Not supported
VLAN 16 unencrypted VLANs
16 static key VLANs
16 dynamic key VLANs
16 unencrypted VLANs
1 static key VLANs
or
4 dynamic key VLANs
Wireless
encryption/cipher
suites
WEP-40, WEP-128, TKIP,
CKIP, CMIC, and
CKIP-CMIC
WEP-40, WEP-128, TKIP,
and AES-CCM
CKIP, CMIC and CKIP-CMIC are not part
of 802.11 standard cipher suites.
Maximum
number of
stations with
WEP
255 116
Maximum
number of
stations with
TKIP
256 26
Maximum
number of
stations with
AES-CCM
256 116
Channelization Statically declared as defined
by IEEE 802.11b/g.
Channel spacing selected by
using the CLI.
WDS server Not supported Can be configured to act as
WDS server.
WDS client 2.4 GHz WMIC
(C3201-WMIC) acting as
Root device can
auto-discover a WDS server.
Acting as Root device, it can
auto-discover and work
within a subnet WDS server.
If the IP address of a WDS server is
statically configured, the 4.9-GHz WMIC,
acting as Root device, can also work with
central WDS server located anywhere in the
network.
Table 1-1 Differences Between the 2.4-GHz WMIC and the 4.9-GHz WMIC
Feature 2.4-GHz WMIC 4.9-GHz WMIC Comment