User's Manual

1-7
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 1 Overview
Management Options
Management Options
You can use the WMIC management system through the following interfaces:
• The IOS command-line interface (CLI), which you use through a PC running terminal emulation
software or a Telnet session. Appendix A, “Connecting to the Cisco 3200 Series Router and Using
the Command-Line Interface,” provides a detailed description of how the CLI is used to confugure
the router. The “Preface” describes the command formats.
• Simple Network Management Protocol (SNMP). Chapter 14, “Configuring SNMP,” explains how to
configure your bridge for SNMP management.
Scanning
Enhancements
for Faster
Roaming
All Scanning Enhancements
for Faster Roaming are
available.
All Scanning Enhancements
for Faster Roaming are
available except “Use First
Better Access Point.”
• Synthesizer tuning time
• Start on Current Channel
• Only Probe Current SSID
• Shorten Wait time for Probe Response
• Automatically Limiting Frequencies
Scanned
• Time out the Scan
• Use First Better Access Point
• Save Best Probe Response
EAP-TLS,
EAP-TTLS
Supported on root devices Not supported
SNMP MIB Ids Supported Supported (new values) The platform-dependent SNMP code was
modified to return new values.
(entPhysicalVendorType, System OID, and
Chassis ID)
Dot11 MIB
parameters
Not available The dot11 parameters are
returned through the dot11
MIB interface.
WDS
server-related
MIBS
Not available Supported
Table 1-1 Differences Between the 2.4-GHz WMIC and the 4.9-GHz WMIC
Feature 2.4-GHz WMIC 4.9-GHz WMIC Comment