User's Manual
E-4
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Appendix E Error and Event Messages
WGB_CLIENT_VLAN: Workgroup
Bridge Ethernet client VLAN not
configured.
A VLAN configuration is missing for
client devices connected to a workgroup
bridge.
Use the workgroup-bridge client-vlan
command to assign a VLAN to
Ethernet client devices connected to the
workgroup bridge.
UNDER_VOLTAGE: Under voltage
condition detected.
The hardware under voltage detection
logic has reported a low voltage
condition.
Check the power supply and associated
power connections.
Table E-1 Error and Event Messages (continued)
Message Explanation Recommended Action