User's Manual

2-13
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Chapter 2 Configuring the WMIC for the First Time
Obtaining and Assigning an IP Address
Assigning Basic Settings By Using the Web Browser
After you determine or assign the WMIC IP address, browse to the Express Setup page and perform an
initial configuration:
Step 1 Open your Internet browser. The web-browser interface is fully compatible with these browsers:
Microsoft Internet Explorer versions 5.0, 5.01, 5.5 and 6.0; and Netscape Navigator versions 4.79 and
7.0.
Step 2 Enter the IP address in the browser address line and press Enter. An Enter Network Password screen
appears.
Step 3 Press Ta b to bypass the Username field and advance to the Password field.
Step 4 Enter the case-sensitive password (usually Cisco) and press Enter. The Summary Status page appears.
Figure 2-1 shows the Summary Status page.
Figure 2-1 Summary Status Page
Step 5
Click Express Setup. The Express Setup screen appears. Figure 2-2 shows the Express Setup page.