User's Manual

Contents
viii
Cisco 3200 Series Wireless MIC Software Configuration Guide
OL-7734-02
Configuring Cipher Suites and WEP 6-3
Creating WEP Keys 6-3
WEP Key Restrictions 6-4
Example WEP Key Setup 6-4
Enabling Cipher Suites and WEP 6-5
Matching Cipher Suites with WPA 6-6
CHAPTER 8 Configuring Authentication Types 7-1
Understanding Authentication Types 7-2
Open Authentication to the WMIC 7-2
Shared Key Authentication to the Bridge 7-2
EAP Authentication to the Network 7-3
Using CCKM for Authenticated Bridges 7-5
Using WPA Key Management 7-5
Configuring Authentication Types 7-5
Default Authentication Settings 7-6
Assigning Authentication Types to an SSID 7-6
Configuring the Root Bridge to Interact with the WDS Device 7-8
Configuring Additional WPA Settings 7-9
Configuring Authentication Holdoffs, Timeouts, and Intervals 7-10
Setting Up a Non-Root Bridge as a LEAP Client 7-10
Matching Authentication Types on Root and Non-Root Bridges 7-11
LEAP Example Configurations 7-12
CHAPTER 9 Configuring WDS, Fast Secure Roaming, and Radio Management 8-1
Understanding WDS 8-2
Role of the WDS Access Point 8-2
Role of Access Points Using the WDS Access Point 8-2
Understanding Fast Secure Roaming 8-3
Understanding Radio Management 8-4
Configuring WDS and Fast Secure Roaming 8-5
Guidelines for WDS 8-5
Requirements for WDS and Fast Secure Roaming 8-5
Configuring the WMIC to use the WDS Access Point 8-5
Configuring the Authentication Server to Support Fast Secure Roaming 8-6
CLI Commands to Enable the WDS Server 8-9
CLI Commands to Enable the Root Device 8-10
dot11 interface speed Command 8-11
Viewing WDS Information 8-12