User's Manual

2-6
Cisco 3200 Series Mobile Access Router Hardware Guide
OL-5816-04
Chapter 2 Fast Ethernet Switch Mobile Interface Card (FESMIC)
FESMIC Component Systems
Table 2-3 FESMIC LED Header Pin Assignments
Pin Signal Description
1 Port0 LINK+ Link Positive LED terminal Port 0
(power supply)
The LED is on while the
10/100 Fast Ethernet link is up
and connected to another device.
11 Port0 LINK- Link Negative LED terminal Port 0
2 Port0 ACT+ Active Positive LED terminal Port 0
(power supply)
Blinks when a packet is either
transmitted or received.
12 Port0 ACT- Active Negative LED terminal Port 0
3 Port1 LINK+ Link Positive LED terminal Port 1
(power supply)
The LED is on while the
10/100 Fast Ethernet link is up
and connected to another device.
13 Port1 LINK- Link Negative LED terminal Port 1
4 Port1 ACT+ Active Positive LED terminal Port 1
(power supply)
Blinks when a packet is either
transmitted or received.
14 Port1 ACT- Active Negative LED terminal Port 1
5 Port2 LINK+ Link Positive LED terminal Port 2
(power supply)
The LED is on while the
10/100 Fast Ethernet link is up
and connected to another device
(4-port FESMIC only).
15 Port2 LINK- Link Negative LED terminal Port 2
6 Port2 ACT+ Active Positive LED terminal Port 2
(power supply)
Blinks when a packet is either
transmitted or received
(4-port FESMIC only).
16 Port2 ACT- Active Negative LED terminal Port 2
7 Port3 LINK+ Link Positive LED terminal Port 3
(power supply)
The LED is on while the
10/100 Fast Ethernet link is up
and connected to another device
(4-port FESMIC only).
17 Port3 LINK- Link Negative LED terminal Port 3
8 Port3 ACT+ Active Positive LED terminal Port 3
(power supply)
Blinks when a packet is either
transmitted or received
(4-port FESMIC only).
18 Port3 ACT- Active Negative LED terminal Port 3
9 Open Do not use
19 Open Do not use
10 Open Do not use
20 Open Do not use