User's Manual

4-8
Cisco 3200 Series Mobile Access Router Hardware Guide
OL-5816-04
Chapter 4 Wireless Mobile Interface Card (WMIC)
Key Features
Differences Between 2.4-GHz (802.11b/g) and 4.9-GHz (US Only, Public Safety)
Radios
Table 4-5 Differences between 2.4-GHz WMIC and 4.9-GHz WMIC
2.4-GHz (802.11b/g) 4.9-GHz (US Only, Public Safety) Comment
Power
Maximum OFDM power level is
15dbm (30mw), but the power level
might vary by country.
Maximum OFDM power level is
17dbm (50mw).
power client Command
Supported Not supported. Use the power
command.
Concatenation
Supported. Not supported.
Fragmentation
Maximum threshold is 4000 bytes. Maximum threshold is 2346 bytes. Fragment counter is
in units of
fragmented packets.
distance Command (to
minimize delay
propagation)
Supported up to 99 kilometers. Supported up to 3 kilometers (1.8
miles).
World Mode
Supported. Not supported.
HTML-Based User
Interface
Supported Not supported
VLANs
16 unencrypted VLANs, 16 static key
VLANs, or 16 dynamic key VLANs,
16 unencrypted VLANs, 1 static key
VLAN, or 4 dynamic key VLANs.
Wireless
encryption/cipher
suites
WEP-40, WEP-128, TKIP, CKIP,
CMIC and CKIP-CMIC
WEP-40, WEP-128, TKIP and
AES-CCM
Max Number of
Stations with WEP
255 116
Max Number of
Stations with TKIP
256 26
Max Number of
Stations with
AES-CCM
256 116
WDS server
Not supported. The 4.9-GHz WMIC can be configured
to act as WDS server.
WDS client
The 2.4-GHz WMIC acting as root
device can auto discover and work with
a subnet WDS server.
The 4.9-GHz WMIC acting as root
device can auto discover and work
within a subnet WDS server. If IP
address of a WDS server is statically
configured on a 4.9-GHz WMIC acting
as root device, the WMIC can also
work with a central WDS server
located anywhere on the network.
EAP-TLS, EAP-TTLS
Supported Not Supported
WDS Server related
MIBS
N/A Supported