User's Manual

4-9
Cisco 3200 Series Mobile Access Router Hardware Guide
OL-5816-04
Chapter 4 Wireless Mobile Interface Card (WMIC)
Key Features
2.4-GHz (802.11b/g) Features
The key features of the 2.4-GHz (802.11b/g) WMIC are listed below.
Data Rates Supported
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Network Standard
IEEE 802.11b and IEEE 802.11g
Frequency Band
2.400-GHz to 2.497-GHz
Modulation
BPSK 1Mbps and 6Mbps
QPSK 2 Mbps and 12 Mbps
CCK 5.5 Mbps
BPSK 9.6 Mbps
CCK2 11 Mbps
QPSK 18 Mbps
16 QAM 24 Mbps and 36 Mbps
64 QAM 48 Mbps and 54 Mbps
Operating Channels
North America: 11; ETSI: 13; Japan: 14
Receive Sensitivity
1Mbps: -94dBm
2Mbps: -91dBm
5.5 Mbps: -89 dBm
11 Mbps: -85 dBm
Available Transmit Power
Settings
100 mW (20 dBm)
50 mW (17 dBm)
30 mW (15 dBm)
20 mW (13 dBm)
5mW (7dBm)
1mW (0dBm)
Maximum power setting will vary according to individual country
regulations.
Range (typical @ 1000-mW
transmit power setting
with 6 dBi diversity dipole
antenna)
Outdoor:
0.5 mile (804 m) @ 45 Mbps
1 mile (1609 m) @ 11 Mbps
3 miles (4,827 m) @ 1 Mbps
Compliance
2.4-GHz (802.11b/g) operates license free under FCC Part 15 and complies
as a Class B device; complies with DOC regulations; complies with ETS
300.328, FTZ 2100, and MPT 1349 standards; rugged version complies with
UL 2043