User's Manual

i
Cisco 3200 Series Mobile Access Router Hardware Guide
OL-5816-04
Introduction to the Cisco 3200 Series
Mobile Access Router Cards
The Cisco 3200 Series Mobile Access Routers include a combination of mobile
interface cards. The following cards are available from Cisco:
• Mobile Access Router Card (MARC)
• Fast Ethernet Switch Mobile Interface Cards (FESMICs)
• Serial Mobile Interface Cards (SMICs)
• Wireless Mobile Interface Cards (WMICs)
A completed router includes a third-party power source, cables, and an enclosure,
that are assembled and installed by your system integrator. This document
describes the cards provided by Cisco Systems, Inc. used to assemble
Cisco 3200 Series Mobile Access Routers. For information regarding the specific
hardware configuration of your router, contact your vendor.
The following chapters provide the information that you need to understand the
physical components of a completed Cisco 3200 Series Mobile Access Router. It
is not intended as assembly or repair instructions.
Chapter 1, “Mobile Access Router Card (MARC),” describes the Mobile Access
Router Card (MARC) layout, ports, and buses.
Chapter 2, “Fast Ethernet Switch Mobile Interface Card (FESMIC),” describes
the Fast Ethernet Switch Mobile Interface Cards (FESMICs) layout, ports, and
buses.