User's Manual
Table Of Contents
- Declarations of Conformity and Regulatory Information for Cisco Access Products with 802.11a/b/g ...
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Department of Communications—Canada
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Wireless Access Products in Japan
- Administrative Rules for Cisco Wireless Devices in Taiwan
- Declaration of Conformity Statements
- Declaration of Conformity Statements for European Union Countries
9
Declarations of Conformity and Regulatory Information for Cisco Access Products with 802.11a/b/g and 802.11b/g Radios
78-16887-01
European Community, Switzerland, Norway, Iceland, and Liechtenstein
Operating Frequency
The operating frequency in a wireless LAN is determined by the access point. As such, it is important
that the access point is correctly configured to meet the local regulations. See the “National Restrictions”
section on page 7 for country specific operating frequency ranges.
Changing Output Power
Connect your PC to the Ethernet port of the wireless access router or host platform of the AP HWIC and
follow these steps to change the output power to meet the local regulations.
Note For detailed information on how to connect your PC to the router, see the appropriate hardware
installation guide or quick start guide.
Step 1 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape
Navigator (version 4.x or later).
Step 2 Enter the access point’s IP address in the browser address line and press Enter. An Enter Network
Password screen appears.
Step 3 Enter the username and password and press Enter. The Summary Status page appears.
Note The default username and password is Cisco. They are case-sensitive.
Cisco product with 802.11a/b/g
radio and antenna
AIR-ANT-M5560P-R
5.5 2.4 100 13 Wall-mount patch
6.0 5 50 10
60 10
120 13
200 15
Cisco product with 802.11a/b/g
radio and antenna AIR-ANT4941
2 2.4 100 17 Swivel-mount dipole
Cisco product with 802.11a/b/g
radio and antenna AIR-ANT5959
2.35 2.4 100 15 Diversity omnidirectional
ceiling-mount
Cisco product with 802.11a/b/g
radio and antenna AIR-ANT1728
5.2 2.4 100 13 Omnidirectional ceiling
Cisco product with 802.11a/b/g
radio and antenna AIR-ANT3549
9 2.4 100 10 Wall-mount patch
Table 3 Maximum Allowed Conducted Power Settings to Meet Regulatory Limits for Output Power (eirp)
Cisco Product and Antenna
Gain
(dBi)
Frequency
Band (GHz)
Regulatory
Limit (eirp)
(mW)
Maximum
Conducted
Power
Setting (dBm) Antenna Description