User's Manual

11
Declarations of Conformity and Regulatory Information for Cisco Access Products with 802.11a/b/g and 802.11b/g Radios
78-16887-01
European Community, Switzerland, Norway, Iceland, and Liechtenstein
Dual-Band (2.4-GHz and 5-GHz) Antennas
The maximum conducted power setting for each of the antennas and the applicable regulatory limits for
dual-band products are provided in Table 6. See the “National Restrictions” section on page 8 to identify
the regulatory limit in your country.
Operating Frequency
The operating frequency in a wireless LAN is determined by the access point. As such, it is important
that the access point be correctly configured to meet the local regulations. See the “National
Restrictions” section on page 8 for country specific operating frequency ranges.
Changing Output Power
Connect your PC to the Ethernet port of the wireless access router or host platform of the AP HWIC and
follow these steps to change the output power to meet the local regulations.
Note For detailed information on how to connect your PC to the router, see the appropriate hardware
installation guide or quick start guide.
Table 6 Maximum Allowed Conducted Power Settings to Meet Regulatory Limits for Output Power (EIRP) in
Dual-Band (2.4-GHz and 5-GHz) Products
Cisco Product Number Gain (dBi)
Frequency
Band (GHz)
Regulatory Limit
(EIRP) (mW)
Maximum
Conducted Power
Setting (dBm)
Antenna
Description
AIR-ANT-M2050D-R 2 2.4
1
1. Outdoor operation within the band 2454–2483.5 MHz is not allowed in France.
100 17 Swivel-mount
dipole
5550 11
60 11
120 14
200 16
AIR-ANT-M4050V-R 4 2.4
1
100 15 Diversity
omnidirectional
ceiling-mount
5550 11
60 11
120 14
200 16
AIR-ANT-M5560P-R 5.5 2.4
1
100 13 Wall-mount patch
6550 10
60 11
120 14
200 16