User Manual

Contents
xvii
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
L2VPN Local Switching—HDLC/PPP 18-10
Prerequisites of L2VPN Local Switching—HDLC/PPP 18-10
Restrictions of L2VPN Local Switching—HDLC/PPP 18-10
PPP Like-to-Like Local Switching 18-10
HDLC Like-to-Like Local Switching 18-11
Configuration Tasks and Examples 18-11
Configuration Tasks for L2VPN 18-12
Setting Up the Pseudowire—AToM Circuit 18-12
Configuring ATM AAL5 SDU Support over MPLS 18-14
Verifying ATM AAL5 SDU Support over MPLS 18-14
Configuring ATM-to-ATM PVC Local Switching 18-14
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS 18-15
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS on PVCs 18-16
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS in VC Class
Configuration Mode 18-18
Configuring Ethernet over MPLS 18-19
Ethernet over MPLS Restrictions 18-20
Configuring Ethernet over MPLS in VLAN Mode 18-20
Configuring Ethernet over MPLS in Port Mode 18-21
IEEE 802.1Q Tunneling for AToM—QinQ 18-22
Prerequisites for IEEE 802.1Q Tunneling (QinQ) for AToM 18-23
Restrictions for IEEE 802.1Q Tunneling (QinQ) for AToM 18-23
Ethernet VLAN Q-in-Q AToM 18-23
Configuration Examples 18-25
Verifying QinQ AToM 18-25
Remote Ethernet Port Shutdown 18-25
Restrictions for Configuring Remote Ethernet Port Shutdown 18-26
Configuring Remote Ethernet Port Shutdown 18-26
Configuring Ethernet over MPLS with VLAN ID Rewrite 18-27
Configuring Frame Relay over MPLS 18-28
Configuring Frame Relay over MPLS with DLCI-to-DLCI Connections 18-28
Configuring Frame Relay over MPLS with Port-to-Port Connections 18-29
Enabling Other PE Devices to Transport Frame Relay Packets 18-30
Configuring Frame Relay-to-Frame Relay Local Switching 18-31
Configuring Frame Relay for Local Switching 18-32
Configuring Frame Relay Same-Port Switching 18-33
Verifying Layer 2 Local Switching for Frame Relay 18-34
Configuring QoS Features 18-34
Configuring HDLC and PPP over MPLS 18-36
Restrictions for HDLC over MPLS 18-36