User Manual

1-23

Cisco 10000 Series Router Software Configuration Guide

OL-2226-23

Chapter 1 Broadband Aggregation and Leased-Line Overview

New Features, Enhancements, and Changes

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a008061128c.html

• Nonstop Forwarding with Stateful Switchover (NSF/SSO) in the Cisco Nonstop Forwarding feature

guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_white_paper09186a00801ce6

f5.shtml

• Pseudowire Emulation Edge-to-Edge MIBs for Ethernet and Frame Relay Services in the

Pseudowire Emulation Edge-to-Edge MIBs for Ethernet, Frame Relay, and ATM Services feature

guide, located at the following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a00805f5112.html

• RADIUS Server Load Balancing in the RADIUS Server Load Balancing feature guide, located at the

following URL:

http://www.cisco.com/en/US/products/ps6566/products_feature_guide09186a008063cffe.html

• Scaling limits for L2TP tunnels in Scaling Enhancements in Cisco IOS Release 12.2(28)SB,

page 2-8

• SSO—Multilink PPP (MLP) in the Stateful Switchover feature guide, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1838/products_white_paper09186a00801ce6

f9.shtml

Note In Cisco IOS Release 12.2(28)SB, the Cisco 10000 series supports Route Processor Redundancy

Plus (RPR+) and Stateful Switchover (SSO). However, for broadband aggregation features the

Cisco 10000 series supports RPR+ only.

• Template ACLs in Chapter 22, “Configuring Template ACLs”

• Two-Rate Policer (also known as Dual Rate Three Color Policer) in the Cisco 10000 Series Router

Quality of Service Configuration Guide, located at the following URL:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918

6a00805b9497.html

• Cisco IOS Release 12.2(28)SB Upgrade in the Upgrading to Cisco IOS Release 12.2(28)SB on a

Cisco 10000 Series Router, located at the following URL:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_upgrade_guides09186a008059a

dee.html

New Features in Cisco IOS Release 12.3(7)XI7

The following features are new on the Cisco 10000 series router in Cisco IOS Release 12.3(7)XI7:

• Dynamic Subscriber Bandwidth Selection in the Cisco 10000 Series Router Quality of Service

Configuration Guide, located at the following URL:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_configuration_guide_book0918

6a00805b9497.html

• L2TP Domain Screening, located at the following URL:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00805a0

782.html