User guide
Table Of Contents
- Cisco 10008 Router
- 1 Documentation and Resources
- 2 Preparing for Installation
- 3 Installing the Router
- 4 Connecting Power
- 5 Connecting Cables
- 6 Powering On the System
- 7 Configuring the Cisco 10008 Router at Startup
- 8 Formatting Flash Disks and Flash Cards
- 9 Managing the File Systems
- 10 Troubleshooting Installation Problems
21
Figure 12 Removing the Safety Cover
Step 2 Loosen the captive screw on the rear safety cover and tilt the cover back to lift it up and out from the chassis.
Figure 13 Stripping Insulation
Step 3 Using a wire-stripping tool, strip not more than 0.4 inches (10 mm) of insulation off the ends of the DC power leads.
30023
14747
10 mm max