Instruction Manual

1-4 Cisco 1005 User Guide
Specifications
Specifications
The specifications of the router are listed in Table 1-1.
Table 1-1 System Specifications
1. DRAM = dynamic random-access memory.
2. SIMM = single in-line memory module.
3. PROM = programmable read-only memory.
4. NVRAM = nonvolatile random-access memory.
5. The serial port supports the following synchronous interfaces: EIA/TIA-232, EIA/TIA-449, V.35, X.21,
and EIA-530. The serial port supports EIA/TIA-232 asynchronous interfaces.
6. EIA/TIA-232 and EIA/TIA-449 were known as recommended standards RS-232 and RS-449 before their
acceptance as standards by the Electronic Industries Association (EIA) and Telecommunications Industry
Association (TIA).
Description Specification
Dimensions (H x W x D) 1.75 x 8.0 x 8.3" (4.4 x 20.3 x 21.1 cm)
Weight 2.6 lb (1.2 kg)
Input voltage, frequency,
and power dissipation
12 VDC output, minimum 0.5A
External power supply: 100–240 VAC at 50–60 Hz, 1.0A input
Memory 4-MB DRAM
1
SIMM
2
1-MB boot PROM
3
8-KB NVRAM
4
WAN interface 1 serial (DB-60)
5
Ethernet interface 1 10BaseT (RJ-45)
PCMCIA slot 1 Type 2 (for Flash ROM card)
Console interface 1 asynchronous serial (EIA/TIA-232
6
) (RJ-45)
Operating environment 32–104°F (0–40°C)
Operating humidity 10–90%, noncondensing
Agency compliance FCC Class B, VCCI Class 2, CISPR-22 Class B,
EN 55022 Class B