Specifications

Chapter 3 Configuring Open Shortest Path First
Showing OSPF Information
3-40
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Showing Summary Route Configuration Information
To show the summary-route configuration information, enter:
# show ospf range
Table 3-10 describes the fields in the show ospf range command output.
Showing OSPF Neighbors
To show the OSPF neighbors, enter:
# show ospf neighbors
Table 3-11 describes the fields in the show ospf neighbors command output.
Table 3-10 Field Descriptions for the show ospf range Command
Field Description
Area ID The ID for the area.
Lsdb Type The type of link-state database. For an ABR, the type is
summaryLink.
Addr Range
Mask Range
The address range for the summary route as specified by the IP
address (Addr Range) and mask (Mask Range) pair.
Effect Displays whether the range is advertised or block.
Table 3-11 Field Descriptions for show ospf neighbors Command
Field Description
Address The IP address of the neighboring router’s interface to the
attached network. This address is used as the destination IP
address when protocol packets are sent as unicasts along this
adjacency. The IP address is also used in router LSAs as the Link
ID for the attached network if the neighboring router is selected
to be the designated router. The CSS learns the neighbor IP
address when it receives hello packets from the neighbor.
Neighbor ID The OSPF Router ID of the neighboring router. The CSS learns
the Neighbor ID when it receives hello packets from the neighbor.