Specifications

4-7
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
Chapter 4 Configuring the Address Resolution Protocol
Showing ARP Information
• summary - Displays the total number of static entries, total number of
dynamic entries, and total number of entries in the ARP resolution table,
excluding the entries from the CSS management port.
• ip_or host - The IP address for the system to display its resolution. Enter the
address in dotted-decimal format (for example, 192.168.11.1) or mnemonic
host-name format (for example, myname.mydomain.com). You cannot enter
an ARP entry derived from the CSS Ethernet management port.
For example, to display the complete ARP resolution table, enter:
# show arp
Table 4-2 describes the fields in the show arp command output.
To display a summary of entries in the ARP resolution table, enter:
# show arp summary
Table 4-3 describes the fields in the show arp summary command output.
Table 4-2 Field Descriptions for the show arp Command
Field Description
IP Address The IP address of the system for ARP mapping.
MAC Address The MAC address of the system mapped to the IP address.
Type The resolution type for the entry: Dynamic or Static. The
Dynamic resolution type indicates that the entry was
discovered through the ARP protocol. The Static
resolution type indicates that the entry is from a static
configuration.
Port The CSS interface configured as the egress logical port.