Specifications

Chapter 4 Configuring the Address Resolution Protocol
Showing ARP Information
4-8
Cisco Content Services Switch Routing and Bridging Configuration Guide
OL-8241-02
To display the global ARP configuration, enter:
# show arp config
Table 4-4 describes the fields in the show arp config command output.
To display the host IP addresses entered at initialization or boot time through
ARP, enter:
# show arp file
To display the ARP entries from the CSS management port, enter:
# show arp management-port
Table 4-3 Field Descriptions for the show arp summary Command
Field Description
Static Entry The total number of static map entries in the ARP
resolution table (from a static configuration).
Dynamic Entry The total number of dynamic map entries in the ARP
resolution table (entries discovered through the ARP
protocol).
Total Entry The total number of static and dynamic entries in the ARP
resolution table.
Table 4-4 Field Descriptions for the show arp config Command
Field Description
ARP Response Timeout The time, in seconds, to wait for an ARP resolution
response before discarding the packet waiting to be
forwarded to an address. The time can be from 5 to 30
seconds. The default is 5 seconds.
ARP Flush Timeout The time, in seconds, to hold an ARP resolution result
in the ARP cache. The timeout period can be from 60
to 86400 seconds (24 hours). The default is 14400
seconds (4 hours). An entry of none or 86401
indicates the ARP entries will not timeout.